Initial Configuration

Nucleus comes out of the box with eth0 configured as a DHCP client, ready to be connected to the internet. The other network ports are configured in the "10" network: eth1 is 10.1.1.1/24, eth2 is 10.2.2.1/24 and eth3 is 10.3.3.1/24. The networks for eth1 and eth2 have a DHCP server listening which will give addresses to anyone connecting.

Connect via Serial Port to the console on the back and use picocom to connect.

~ # picocom -b 19200 /dev/ttyUSB0
picocom v1.6

port is        : /dev/ttyUSB0
flowcontrol    : none
baudrate is    : 19200
parity is      : none
databits are   : 8
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : no
nolock is      : no
send_cmd is    : sz -vv
receive_cmd is : rz -vv
imap is        : 
omap is        : 
emap is        : crcrlf,delbs,

Terminal ready
comments powered by Disqus